What if the ceiling is too low or a teppanyaki grill table will not fit in the lift?

A table is built in sections and assembled on site, so length is not the constraint; the section length is the question. Measure the doorway, the lift car and the stair turn, and build to the smallest. On ceiling height, overhead extraction needs a void in the ceiling while downdraft does not.

Two things decide whether a teppanyaki grill table fits a site: the ceiling height and the lift. Ceiling height shapes the extraction plan. The lift shapes how the table is split for delivery. Both are settled at the drawing stage.

Ceiling height, in three layers

Start with the table itself, which stands at counter height. Above it there has to be room for the chef to work and for guests to watch, with nothing pressing down on them. Then extraction. Overhead extraction needs a void in the ceiling for a hood and a duct, and the ceiling is worked back from that allowance. Downdraft sends air out through the body instead, with nothing fitted above, so a tight ceiling is easier to handle.

The lift, and how the table is split

A teppanyaki grill table is not one welded block. Frame, griddle, body and surround are made separately and assembled on site. A long double-chef unit arrives in several sections, joined at the inlets and set to the drawing. Length is not the obstacle; the way the table is split is.

Measure three places with a tape. One is the clear width and height of the doorway. Another is the internal width and depth of the lift car. The third is the clear width of the stair turn or corridor. The smallest of the three sets the section length and the weight per piece. Trust the tape rather than the landlord's drawing, because approval plans and real lift cars often differ.

If the lift is too small, the choice is a service lift, the stairs, or a hoist through a window. Once sections pass the doorway, they are carried by hand. A night hoist needs building approval, a road closure and insurance, filed ahead of the date.

Fitting it into a working restaurant

A teppanyaki grill table can go in on night shifts, with the restaurant trading by day. The sequence is delivery and assembly, levelling and welding the frame, fitting the stone counter, then extraction, power, the surround and handover. A single table usually takes one to two days.

Send the four numbers before the drawing

Kitchen floor plan, ceiling height, doorway dimensions and lift car dimensions go together, and they sit with the design drawings for the room. The equipment drawing then marks where the table is split and the size of each piece. Finding the problem after the table is built means cutting it on site, which is the costly kind of rework.

Both questions are answered on paper. Ceiling height sets the extraction plan, and the lift sets how the table is split. Measure both before the drawing is issued, and neither turns into rework on site.

About Cookeryaki

Cookeryaki, founded in 2004, makes teppanyaki grill tables, with headquarters and a showroom in Pudong, Shanghai, and a 5,000+ sqm factory in Huai'an, Jiangsu. Every table has a built-in fume purification system with a purification rate of up to 95%, and the countertop size and shape are built to order. The company holds multiple international certifications and dozens of patents granted by the China National Intellectual Property Administration.