Use Smoke-Free Barbecue Grill | Ignition Preparation

Some smoke-free grills require fire to cook food. To ensure the safety of users, we must pay special attention to safety and prepare for ignition when using smoke-free grills, especially when yourself using them. Specifically do the following:

1. Check first: Before using the smokeless grill, check whether the gas or gas connection is tight, check whether the pipeline is damaged, and there is no problem before continuing to use it.

2. Keep the oil basin moist: After checking the pipes and connections, continue to check the residue oil basin to see if there is a little water in it. If there is no need to add it, keep it moist at all times. Check after a while, add water after drying.

3. Open valve ignition: Open the gas or gas valve, press the knob in the correct direction to turn on the ignition, and let go after success. This is the rotary switch to adjust the firepower. If the ignition is not successful, repeat the above ignition process until successful. After the success, the burning plate will be ignited entirely, with a light blue flame on it, which is a very thin layer at the beginning. It will gradually disappear after 60 seconds, and it will be turned into an open flame. It can be grilled normally.

4. Turn off the fire and the gas: Turn off the fire or the gas after using the smokeless grill, and then take it back.

Only by preparing for ignition and adding correct operation steps can the operator's personal safety be guaranteed.