How to Maintain Smokeless Gas & Electric Hotel Teppanyaki Table?

Whether it is the Japaneses/Hibachi Grills table for sale in the international hotel or the street side, when you use up the necessary conditions for immediate cleaning, cut off the power and turn off the operation of the Mobile Smokeless Gas & Electric Hotel Teppanyaki Table. First of all, not to clean the surface of the steel plate, but to never embroider the steel. The exhaust port starts to clear, the accumulated oil and check whether there is dirt blocking the flue. Clean it up to ensure the normal operation of the next use.

First, teppanyaki is delicious and delicious, but it is greasy after use. There are everything on it, such as seasonings, food residues, oil and water, etc. How to clean and maintain the equipment to last longer?

1. First of all, it must be cleaned. After each use of teppanyaki, the surface of the teppanyaki steel plate should be cleaned immediately, and the water stains should be wiped off to ensure that the surface of the steel plate is as clean as new;

2. Then you can drop some salad oil on the surface of the teppanyaki, and wipe it with a clean soft cloth soaked in the salad oil, so that the equipment will be brighter;

3. After cleaning the equipment, it is time to clean some related things, such as stainless steel suction hood, oil net and oil suction bucket, and clean the oil stains of the air duct regularly to ensure the smoothness of the air duct;

4. Finally, check everything again to make sure that the whole set of equipment can be used next time.

Second, nowadays, there are all kinds of Restaurant 7 seats Japanese Teppanyaki Grill Table, such as Korean, Japanese, smokeless, French and so on. But many people lack maintenance knowledge, so below we introduce you a simple teppanyaki maintenance method:

1. After each use, the surface of the steel plate should be cleaned, and water and oil stains should be wiped off to keep the surface of the steel plate smooth and clean;

2. After cleaning up, put a small amount of salad oil on the countertop and wipe it with a scouring pad until the brightness appears;

3. After the scouring pad is wiped, wipe the countertop and apply a small amount of salad oil;

4. After using the Japanese commercial gas stainless steel Hibachi table every day, you need to clean the stainless steel suction hood, oil net and oil suction bucket;

5. Next, check the exhaust vents, and the ventilation ducts should be checked and cleaned regularly to ensure the smooth flow of the air ducts;

6. When you use it, you need to pay special attention not to dump garbage, dirty oil, sewage and other debris into the lower flue of the stainless steel exhaust port to prevent the flue from being blocked;

7. The air duct should be cleaned regularly to ensure that the air duct is unblocked, so that it can serve you longer;

8. After cleaning up, don't rush to cover the dust-proof cloth, apply a little salad oil on the surface of the steel plate to ensure the smoothness of the countertop, and then wipe it clean with a soft cloth;

9. Regularly check the electric heating or gas heating pipes to see if they are damaged by pests such as cockroaches, to ensure the next use, and to maintain the cleanliness of the air outlet and the air outlet, which is also conducive to the production of food;

10. Maintenance has a lot to do with the effect of food production, and to ensure the longevity of use. It is the so-called sharpening of the knife without cutting wood by mistake, so that good food can be made.

The trick for teppanyaki to become the top of the food list, Cookeryaki suggests that every time you use the equipment, the most direct thing is that there are many oil and water stains on the surface of the steel plate. The steel plate can be cleaned with dish soap or a few drops of lemon juice. There are black substances left on the steel plate (such as those left by fried steak). Remember not to scrub with steel wire, otherwise the service life of the steel plate will be almost the same. When encountering such dirty material, use a spatula to clean the surface first, then put some acidic material such as vinegar, soak it for a few minutes, and then remove it with a rag.