Gas Teppanyaki Grill In Singapore | Operation Guide | Cookeryaki

Gas Teppanyaki Grill Operation Guide:

1. Before operation, please check whether the Singapore local air source matches the air source marked on the nameplate of the "Teppanyaki hibachi grill" equipment.

2. After confirming that the air source is consistent, first turn on the main power switch. Then start the fan switch, press the air valve knob and turn it clockwise to the maximum. Vent the air after a few seconds.

3. Open the gas main valve and the "teppanyaki grill affordable price" gas valve. Press the gas switch with your right hand and turn it counterclockwise by 15 degrees. Release after about 10 seconds. At this time, the thermocouple was attracted. Open the valve, then press the gas switch again, turn it counterclockwise 90 degrees, and then release it. At this time, the main fire is on and in the maximum position.

4. If you want to turn off the main fire, you can turn off the gas switch with your right hand. Then rotate counterclockwise to 170 degrees. At this time, it is the smallest fire.

5. If there is a fume purifier in the "teppanyaki", please turn it on before cooking.

6. To turn off the "Teppanyaki Table" air pressure switch, turn it clockwise to the 0 position.

7. If the ignition fails several times, check whether the ignition wire and battery are invalid.

Warning: When designing the installation of electrical components, the neutral ground must be connected. The fan must be turned on before ignition.

Gas Teppanyaki Table Precautions:

1. The user must carefully read the "Instruction Manual" before operating, and strictly follow the operating requirements and procedures. In this way, "teppanyaki" can be used better and longer.

2. Flammable and explosive materials shall not be placed near "Teppanyaki".

3. The user shall not modify the gas pipeline and dismantle the combustion equipment without authorization. Avoid liability accidents such as gas leaks.

4. The installation, repair and maintenance of "Teppanyaki" must be performed by a professional electrician.

5. Do not use excessive force during operation.

6. Please pay attention to the waterproof of electrical components when cleaning.

The place where the teppanyaki table for sale is heated must be well ventilated.

This is because the gas consumes oxygen in the air to support combustion. At the same time produce flue gas containing carbon dioxide and a small amount of carbon monoxide;

During the installation process, the nozzle should hang down naturally and be kept 10 cm above the distance. So as not to be burnt into an accident.

Cookeryaki tepanyaki has passed quality inspection, safety, environmental protection, and safe use!

Pay attention to frequently check the hose for looseness, falling off, cracking and deterioration.

If the service life exceeds three years, contact the maintenance department for replacement.

Regularly use soapy water to check whether the joints, switches, hoses and other parts of the natural gas equipment are leaking.

Never use matches to check for leaks. If you find bubbles or smell of natural gas, turn off all switches.