Gas Teppanyaki Grill Equipment Common Problems and Solutions

Gas Teppanyaki equipment may encounter various problems in daily use. The following are the problems and solutions we have summarized. You can also refer to the article “Gas Heating Teppanyaki Table Equipment Operation Precautions” for analysis.

 

1. Commercial Hibachi Grill point fire failure analysis:

There is too much air in the pipeline, the battery in the igniter is exhausted, the small fire pipe is blocked, the ignition switch is bad, and the high-voltage ignition wire is poorly insulated.

Solution: Eliminate the air inside the pipe, replace the battery inside the igniter, remove the garbage in the pipe, replace Ignition line.

 

2. Gas Commercial Teppanyaki Grill furnace failure analysis:

Whether the gas valve is open to the maximum, the gas source and voltage do not meet the teppanyaki equipment, the burner damper is not adjusted optimally, and the oxygen is not enough (the equipment seal is too dead);

Solution: Open the gas valve to the maximum position and replace the gas source Or replace the burner with the gas source, adjust the damper, and leave enough air inlet.

 

3. Smokeless Teppanyaki Grill open and close the gas valve has a burst sound or abnormal sound failure analysis:

Tempering phenomenon, the burner damper is not adjusted to the best, the air source pressure is too large or too small;

Solution: adjust the damper and adjust the air source pressure.

 

4. Analysis of irritating odor or odor failure during work:

The damper of the burner is not adjusted to the best, resulting in insufficient combustion and gas leakage.

Solution: Adjust the damper and check the gas pipeline.

 

5. The fan does not turn fault analysis:

Poor fan opening, contactor failure, fan failure, power failure;

Solution: replace the fan switch, replace the contactor, replace the fan, and repair the power supply.

 

6. Poor suction effect analysis:

The fan is reversed, the opening of the damper is too small, and there is foreign matter in the pipeline.

Solution: Change the phase of the power supply, adjust the damper, and remove foreign matter in the pipeline.

 

7. The fan has vibration or abnormal noise analysis:

There are foreign objects in the fan, air leakage in the pipe, and loose fan fixing screws.

Solution: Remove foreign matter from the fan.

 

8. Analysis of large fume:

The electrodeplate of the lampblack purifier is too dirty, the control module of the lampblack purifier is faulty, and the switch is bad; solution: cleaning the motor board, replacing the purifier control module, and replacing the switch.

 

Cookeryaki, the leading professional Manufacturer of Teppanyaki Grill Equipment in China. The main products include teppanyaki hibachi grill, teppanyaki hot plate for sale, mobile teppanyaki table, teppanyaki grill for outdoor gas, table hibachi grill for sale and other teppanyaki equipment. sells at the original cheap price, and there is no middleman to make a difference.

schematic diagram of teppanyaki decomposition