Electric Heating Teppanyaki Hibachi Grill Operating Instructions

1. First turn on the fan power supply of the electric hibachi grill table, check the ventilation system, and then proceed to the next step after normal operation. It is also possible to temporarily turn off the exhaust fan and turn it on again during actual operation.

2. Then turn on the power switch of the electric teppanyaki grill table, the power indicator lights up, press the heating start button, the heating tube starts heating work, and stops when the temperature reaches the set upper limit. Finally, the heating element of the equipment will cycle between the upper and lower temperature limits under the control of digital temperature control.

3, temperature control setting process: First, turn on the power switch, the power light is on, start 挚, press SET 0.5 seconds, the screen displays CC.

Note: 1. Lock value 0 is unlocking, 1 is blocking, others are factory settings, and it is forbidden to change.

2. The upper limit of PH temperature is strictly prohibited to exceed 380 °C.

3. Set CC to the difference between the upper and lower limits (ie, the upper limit minus the lower limit).

4. Set P to 0.

To find out more, click on "Electric Heating Teppanyaki Table Equipment Operation Instruction".